GSO ISO 13726:2016
Gulf Standard
Current Edition
·
Approved on
22 December 2016
·
Hydraulic fluid power -- Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm -- Accessory mounting dimensions
GSO ISO 13726:2016 Files
English
7 Pages
Current Edition
Reference Language
28.76 OMR
GSO ISO 13726:2016 Scope
This International Standard specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-3, but this does not limit their application.
This International Standard covers the following accessories:
— AP2 – rod clevis, female thread (see Figure 1 and Table 1);
— AP4 – rod eye, plain, female thread (see Figure 2 and Table 2);
— AA4 - L – pivot pin (locking plate) (see Figure 3 and Table 3);
— AL6 – locking plate for pivot pin (see Figure 4 and Table 4);
— AA4 - S – pivot pin plain (see Figure 5 and Table 5).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 2944 and ISO 3320.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 9093:2024
ISO 9093:2020
Gulf Standard
Small craft — Seacocks and through-hull fittings
GSO ASTM A105/A105M:2024
ASTM A105/A105M:23
Gulf Standard
Standard Specification for Carbon Steel Forgings for Piping Applications
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing