GSO ASTM C94/C94M:2016
ASTM C94/C94M:16
Gulf Standard
Historical
·
Approved on
22 December 2016
Standard Specification for Ready-Mixed Concrete
GSO ASTM C94/C94M:2016 Files
English
14 Pages
Historical
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO ASTM C94/C94M:2016 Scope
This specification covers ready-mixed concrete manufactured and delivered to a purchaser in freshly mixed and unhardened state as hereinafter specified. Requirements for quality of concrete shall be either as hereinafter specified or as specified by the purchase. In any case where the requirements of the purchaser differ from these in this specification, the purchaser's specification shall govern. In the absence of designated applicable materials specifications, materials specifications specified shall be used for cementitious materials, hydraulic cement, supplementary cementitious materials, cementitious concrete mixtures, aggregates, air-entraining admixtures, and chemical admixtures. Except as otherwise specifically permitted, cement, aggregate, and admixtures shall be measured by mass. Mixers will be stationary mixers or truck mixers. Agitators will be truck mixers or truck agitators. Test methods for compression, air content, slump, temperature shall be performed. For s strength test, at least two standard test specimens shall be made.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
OS GSO 1431:2002
GSO 1431:2002
Omani Standard
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
OS GSO 1427:2008
GSO 1427:2008
Omani Standard
Ceramic Sanitary Appliances - Western Water Closets
Recently Published from Construction and Building Sector
GSO 113:1989
Gulf Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
OS GSO 113:1989
GSO 113:1989
Omani Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
GSO ASTM C687:2025
ASTM C687:24
Gulf Standard
Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
GSO ASTM E2266:2025
ASTM E2266:22
Gulf Standard
Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion