GSO ISO 3582:2016
Gulf Standard
Current Edition
·
Approved on
07 April 2016
·
Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
GSO ISO 3582:2016 Files
Arabic
13 Pages
Current Edition
43.82 OMR
English
9 Pages
Current Edition
Reference Language
28.76 OMR
GSO ISO 3582:2016 Scope
This International Standard specifies a small-scale laboratory screening procedure for comparing the relative horizontal burning characteristics of small test pieces of flexible cellular polymeric material exposed to a low-energy source of heat. It is intended only for the purpose of assessing quickly and simply the horizontal burning characteristics of small test pieces of the material as such, i.e. considered without reference to the environmental conditions under which the material, or products made from it, may be used. As a consequence, it is not possible to establish a correlation between the results of this test and the performance of such materials or products under actual service conditions. The test is restricted to test pieces of thickness greater than 5 mm. Results of tests on test pieces of different thicknesses are not comparable.
This test method is not intended to be used to assess the potential fire hazard in use.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R76-1:2009
GSO OIML R 76-1:2009
Omani Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 10360-10:2024
ISO 10360-10:2021
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO ISO 11807-1:2024
ISO 11807-1:2021
Gulf Standard
Integrated optics — Vocabulary — Part 1: Optical waveguide basic terms and symbols