GSO ISO 15167:2015
ISO 15167:1999
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Petroleum products -- Determination of particulate content of middle distillate fuels -- Laboratory filtration method
GSO ISO 15167:2015 Files
English
8 Pages
Current Edition
Reference Language
OMR
31.02
GSO ISO 15167:2015 Scope
This International Standard specifies a method for the determination of the particulate content of middle distillate fuels with a closed flash point of 38 °С or higher, determined in accordance with ISO 2719, ISO 3679 or ISO 13736. It is not applicable to light distillate fuels (gasolines) or to aviation fuels.
A gravimetric limitation of the contamination of middle distillate fuels used in diesel engines and domestic applications should be used for the control of filter plugging and other operational problems, and this procedure is applicable up to 25 g/m3.
The precision of this procedure is only valid if the results are obtained strictly in accordance with the provisions of this International Standard, particularly in respect of the material used for the filter (see the note in 6.9), sample size and filtration of the complete sample.
Best Sellers From Oil and Gas Sector
OS GSO 1785-1:2024
GSO 1785-1:2024
Omani Standard
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
GSO 1785-1:2024
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
OS GSO 672:2010
GSO 672:2010
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
Recently Published from Oil and Gas Sector
GSO ISO 14687:2026
ISO 14687:2025
Gulf Standard
Hydrogen fuel quality — Product specification
GSO ASTM D1945:2026
ASTM D1945:25
Gulf Standard
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
GSO ASTM D4683:2026
ASTM D4683:25
Gulf Standard
Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
GSO ASTM D4952:2026
ASTM D4952:23
Gulf Standard
Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)