GSO IEC 60404-1:2015
IEC 60404-1:2000
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Magnetic materials - Part 1: Classification
GSO IEC 60404-1:2015 Files
No files are available for this standard right now!
GSO IEC 60404-1:2015 Scope
This standard is intended to classify commercially available magnetic materials.
The term "magnetic materials" denotes substances where the application requires the existence of ferromagnetic or ferrimagnetic properties.
In this standard, the classification of magnetic materials is based upon the generally recognized existence of two main groups of products:
soft magnetic materials (coercivity ≤1 000 A/m);
hard magnetic materials (coercivity >1 000 A/m).
Within these main groups, the classification when appropriate recognizes the following characteristics:
the main alloying element and the metallurgical state and physical properties of the material;
when possible and convenient, the relationship between these characteristics is identified.
A classification by specific areas of application cannot be applied to all materials because different materials can very often be used for the same application depending on the characteristics required.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
Recently Published from Electrical Sector
GSO 2770:2024
Gulf Standard
WATER HEATERS - ENERGY PERFORMANCE REQUIREMENTS
GSO IEC 61558-2-2:2024
IEC 61558-2-2:2022
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
GSO IEC 60664-1:2024
IEC 60664-1:2020
Gulf Standard
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
GSO IEC 61936-2:2024
IEC 61936-2:2023
Gulf Standard
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC