GSO IEC/TS 60034-25:2015
IEC TS 60034-25:2014
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
GSO IEC/TS 60034-25:2015 Files
English
180 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC/TS 60034-25:2015 Scope
This part of IEC 60034 describes the performance characteristics of a.c. electrical machines
for use on converter supplies. For electrical machines specifically designed for converter duty
application design features are defined. It also specifies the interface parameters and
interactions between the electrical machine and the converter including installation guidance
as part of a power drive system, but except for the voltage at the power interface which is
described in IEC 61800-8.
The general requirements of relevant parts of the IEC 60034 series of standards also apply to
electrical machines within the scope of this technical specification.
For electrical machines operating in potentially explosive atmospheres, additional
requirements as described in the IEC 60079 series or IEC 61241 series for dust ignition proof
apply.
This technical specification is not primarily concerned with safety. However, some of its
recommendations may have implications for safety, which should be considered as necessary.
Where a converter manufacturer provides specific installation recommendations, they should
take precedence over the recommendations of this technical specification.
Best Sellers From Electrical Sector
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems
Recently Published from Electrical Sector
GSO IEC 60704-2-3:2026
IEC 60704-2-3:2025
Gulf Standard
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
GSO IEC 60270:2026
IEC 60270:2025
Gulf Standard
High-voltage test techniques – Charge-based measurement of partial discharges
GSO IEC TS 62600-301:2026
IEC TS 62600-301:2019
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment
GSO IEC TS 62600-10:2026
IEC TS 62600-10:2021
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs)