GSO IEC 60534-8-3:2015
IEC 60534-8-3:2010
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
GSO IEC 60534-8-3:2015 Files
No files are available for this standard right now!
GSO IEC 60534-8-3:2015 Scope
This part of IEC 60534 establishes a theoretical method to predict the external soundpressure
level generated in a control valve and within adjacent pipe expanders by the flow
of compressible fluids.
This method considers only single-phase dry gases and vapours and is based on the perfect
gas laws.
This standard addresses only the noise generated by aerodynamic processes in valves and
in the connected piping. It does not consider any noise generated by reflections from
external surfaces or internally by pipe fittings, mechanical vibrations, unstable flow patterns
and other unpredictable behaviour.
It is assumed that the downstream piping is straight for a length of at least 2 m from the
point where the noise measurement is made.
This method is valid only for steel and steel alloy pipes (see Equations (21) and (23) in 5.5).
The method is applicable to the following single-stage valves: globe (straight pattern and
angle pattern), butterfly, rotary plug (eccentric, spherical), ball, and valves with cage trims.
Specifically excluded are the full bore ball valves where the product FpC exceeds 50 % of
the rated flow coefficient.
For limitations on special low noise trims not covered by this standard, see Clause 8. When
the Mach number in the valve outlet exceeds 0,3 for standard trim or 0,2 for low noise trim,
the procedure in Clause 7 is used
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
Recently Published from Electrical Sector
GSO 2770:2024
Gulf Standard
WATER HEATERS - ENERGY PERFORMANCE REQUIREMENTS
GSO 2771:2024
Gulf Standard
Energy Efficiency Label for Electrical Appliances – design and dimensions
GSO 2769:2024
Gulf Standard
Household Refrigerating Appliances - Energy Performance and Testing
GSO IEC 63296-1:2024
IEC 63296-1:2021
Gulf Standard
Portable multimedia equipment - Determination of battery duration - Part 1: Powered loudspeaker equipment