GSO ISO 13857:2015

ISO 13857:2008
Gulf Standard   Current Edition · Approved on 03 September 2015

Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs

GSO ISO 13857:2015 Files

English 17 Pages
Current Edition Reference Language
OMR 46.16

GSO ISO 13857:2015 Scope

This International Standard establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see 4.3). This International Standard covers people of 14 years and older (the 5th percentile stature of 14 year olds is approximately 1400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openings needs to be addressed. NOTE 1 Data for preventing lower limb access for children is not considered. The distances apply when adequate safety can be achieved by distance alone. Because safety distances depend on size, there will be some people of extreme dimensions who will be able to reach hazard zones even when the requirements of this International Standard are complied with. NOTE 2 These safety distances will not provide sufficient protection against certain hazards, for example, radiation and emission of substances. For such hazards, additional or other measures need to be taken. The clauses of the International Standard covering lower limbs apply when access by the upper limbs is not foreseeable according to the risk assessment. The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1). NOTE 3 This International Standard is not intended to provide measures against reaching a hazard zone by climbing over.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 10972-1:2026
ISO 10972-1:2025 
Gulf Standard
Cranes — Requirements for mechanisms — Part 1: General
GSO ISO 7141:2026
ISO 7141:2022 
Gulf Standard
Road vehicles — Light alloy wheels — Lateral impact test
GSO ISO/TS 7815-1:2026
ISO/TS 7815-1:2025 
Gulf Standard
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture
GSO ASTM D8002:2026
ASTM D8002:24 
Gulf Standard
Standard Test Method for Modified Fouling Index (MFI-0.45) of Water