GSO ISO 6103:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing
GSO ISO 6103:2015 Files
English
7 Pages
Current Edition
Reference Language
28.76 OMR
GSO ISO 6103:2015 Scope
This International Standard specifies the maximum permissible values of unbalances for bonded abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed vs ≥ 16 m/s, in the as-delivered condition.
It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.
This International Standard is applicable to bonded abrasive wheels in the as-delivered condition.
This International Standard is not applicable to
— diamond, cubic boron nitride or natural stone grinding wheels, or
— centreless control wheels, lapping and disc wheels, ball wheels or glass grinding wheels.
NOTE 1 The values given refer to the grinding wheel itself, independent of any unbalance which may exist in the balancing arbor or in the means of fastening it to this arbor. These various elements, together with the flanges or hub-flanges, are assumed to be balanced, homogeneous and free from geometrical defects.
NOTE 2 The effects of unbalance are basically
— additional stresses on the arbor, the machine and its mounting,
— excessive wear of the bearings,
— vibration prejudicial to the quality of machining and increased internal stresses in the grinding wheel, and increased operator fatigue.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
GSO EN 14622:2024
EN 14622:2005
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F