GSO ISO 9286:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Abrasive grains and crude -- Chemical analysis of silicon carbide
GSO ISO 9286:2015 Files
English
22 Pages
Current Edition
Reference Language
58.88 OMR
GSO ISO 9286:2015 Scope
This International Standard covers the chemical analysis of silicon carbide based abrasive grains and crudes. It is applicable for the determination of the surface impurities of abrasives grains and determining the SiC content of crushed crude when the silicon carbide content is greater than 95 % (m/m).
When the grain size of the silicon carbide is greater than or equal to 15 μm, the determination of the loss on acid treatment is carried out according to the method given in 3.5 and the crudeSiC content (SíCR) according to the method given in 3.7.
When the grain size of the silicon carbide is smaller than 15μm, the determination of the SiC content shall be carried out by the methods described in 4.3 and 4.4.2.1 or 4.4.2.3 and 4.5 because the methods given in 4.2 and 3.7 inevitably give false results due to oxidation.
When the surface carbon content [w(Csurf)] is greater than 2 % (m/m), a coulometric determination according to the method described in 3.4.2.3 will give correct results. The gravimetric method described in 3.4.2.1 is only applicable to surface carbon contents which are greater than 2 % (m/m), if ignition is continued to a constant weight or a weight increase. The coulometric method described in 3.4.2.2 cannot be applied in cases where w(Csurf) is more than 2%.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
GSO EN 14622:2024
EN 14622:2005
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F