GSO ISO 9327-4:2013

ISO 9327-4:1999
Gulf Standard   Current Edition · Approved on 31 December 2013

Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength

GSO ISO 9327-4:2013 Files

English 8 Pages
Current Edition Reference Language
OMR 30.71

GSO ISO 9327-4:2013 Scope

1.1 This part of ISO 9327 applies to forgings and rolled or forged bars in thicknesses up to 250 mm manufactured from fine grain steels (see NOTE) given in Table 1 and to be delivered according to the specifications given in ISO 9327-1. The steels are classified into — room temperature grades (P…), — elevated temperature grades (PH…), — low temperature grades (PL…), — low and elevated temperature grades (PLH…). NOTE Fine grain steels are here understood as steels with grain size 6 or finer according to the grain size charts in ISO 643. 1.2 This part of ISO 9327 covers the following data: a) In Table 1 the limits for — the chemical composition according to the cast analysis; — the tensile properties at room temperature; — the indications on the usual heat treatment condition at the time of delivery; b) in Table 2 the permissible product analysis tolerances on the limiting values given for the cast analysis; c) in Table 3 the minimum impact energy values; d) in Table 4 the minimum elevated temperature proof strength values.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 1780:2010
 
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

OS GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025 
Omani Standard
Ladders - Part 3: Marking and user instructions
OS GSO EN 10217-1:2026
EN 10217-1:2019 
Omani Standard
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
OS GSO EN 17860-1:2026
EN 17860-1:2024 
Omani Standard
Carrier cycles - Part 1: Terms and definitions
OS GSO ASTM A182/A182M:2026
ASTM A182/A182M:26a 
Omani Standard
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service