GSO IEC 62037-3:2013
IEC 62037-3:2012
Gulf Standard
Current Edition
·
Approved on
31 December 2013
Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors
GSO IEC 62037-3:2013 Files
English
8 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 62037-3:2013 Scope
This part of IEC 62037 defines the impact test on coaxial connectors to evaluate their
robustness against weak connections and particles inside the connector as independently as
possible from the effects of cable PIM (passive intermodulation).
For other connectors (e.g. panel mounted connectors), the cable can be replaced by an
adequate transmission-line (e.g. airline, stripline). In order to evaluate the effects of
mechanical stresses on the connectors, a series of impacts is applied to the connectors while
measuring the PIM.
Best Sellers From Metrology Sector
OS GSO OIML R87:2021
OIML R87:2016
Omani Standard
Quantity of product in prepackages
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R79:2021
OIML R79:2015
Omani Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO OIML R 69:2002
OIML R 69:1985
Gulf Standard
GLASS CAPILLARY VISCOMETERS FOR THE
MEASUREMENT OF KINEMATIC VISCOSITY
VERIFICATION METHOD
GSO 266:1994
Gulf Standard
Method of verification of weighbridges for road vehicles (Trucks)
OS GSO CISPR 15:2002
CISPR 15:1999
Omani Standard
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
OS GSO 1466:2002
GSO 1466:2002
Omani Standard
Metals hardness values tabels: test of tensile and hardness