GSO IEC 60839-5-1:2013

IEC 60839-5-1:1991
Gulf Standard   Current Edition · Approved on 09 September 2013

Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems

GSO IEC 60839-5-1:2013 Files

English 31 Pages
Current Edition Reference Language

GSO IEC 60839-5-1:2013 Scope

This section of IEC 839-5 specifies the general requirements for the performance, reliability and security characteristics of alarm transmission systems. It covers the general requirements for connections providing signalling between an alarm system and an alarm receiving centre. Additional requirements for specific alarm transmission systems are given in separate sections as parts of IEC 839-5. This does not preclude the use of any transmission system not - covered by one of these specific sections, provided that it meets these general requirements. This section does not specify the method of display of information and the installation of equipment.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016 
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007 
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES

Recently Published from Electrical Sector

GSO IEC 63522-32:2026
IEC 63522-32:2025 
Gulf Standard
Electrical relays - Tests and measurements - Part 32: Acoustic noise
GSO IEC PAS 63629:2026
IEC PAS 63629:2025 
Gulf Standard
PSR – Specific rules for luminaires
GSO IEC 60704-2-3:2026
IEC 60704-2-3:2025 
Gulf Standard
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
GSO IEC 60270:2026
IEC 60270:2025 
Gulf Standard
High-voltage test techniques – Charge-based measurement of partial discharges