GSO EN 13114:2002+A1:2011

EN 13114:2002+A1:2009
Gulf Standard   Current Edition · Approved on 12 October 2011

Tannery machines - Rotating process vessels - Safety requirements

GSO EN 13114:2002+A1:2011 Files

GSO EN 13114:2002+A1:2011 Scope

1.1 This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine. 1.2 This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels. 1.3 This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere. 1.4 This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. 1.5 This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN. 1.6 This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO 1616:2002
 
Gulf Standard
Domestic and contract furniture-part 2 : methods of test for settees.
GSO 1620:2002
 
Gulf Standard
Domestic and contact furiniture -part 4 :methods of testing tables.
GSO 198:1994
 
Gulf Standard
CHEMICAL ANALYSIS OF CARBON STEEL – DETERMINATION OF NITROGEN
GSO 376:1994
 
Gulf Standard
Code of practice for the inspection and testing of steam and hot water boilers -- Part 6: Periodic internal inspection