GSO ISO 10337:2009
Gulf Standard
Current Edition
·
Approved on
11 February 2009
·
Crude petroleum - determination of water - Coulometric Karl Fischer Titration Method
GSO ISO 10337:2009 Files
English
12 Pages
Current Edition
Reference Language
8.8 OMR
GSO ISO 10337:2009 Scope
This International Standard specifies a coulometric Karl Fischer titration method for the direct determination of water in crude
petroleum. It covers the range 0,050 % (m/m) to 5,00 % (m/m) water in crude petroleum containing less than 0,05 % (m/m) but
more than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or both. It covers the range 0,020 % (m/m) to
5,00 % (m/m) water in crude petroleum containing less than 0,005 % (m/m) of either mercaptan sulfur or sulfide ion sulfur or
both.
NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactions interfere in the
determination of water by Karl Fischer titration. However, the only likely interfering substances present in crude petroleum are mercaptans
and ionic sulfides and providing that they are present at levels less than 0,05 % (m/m), the interference is insignificant when determining
water in the range 0,050 % (m/m) to 5,00 % (m/m).
NOTE 2 An alternative procedure is provided in annex B for the direct determination of water over the range 0,05 % (V/V) to
5,00 % (V/V) in crude petroleum containing less than 0,05 % (V/V) of either mercaptan sulfur or ionic sulfide sulfur or both. The limitations
under which this alternative volume measurement may be used are listed in annex B. The volume measurement may also be used to
determine water in the range 0,02 % (V/V) to 5,00 % (V/V) if the above interfering substances are present at levels of less than 0,005 % (V/V)
as either mercaptan sulfur or ionic sulfide sulfur or both.
NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume
fractions respectively
Best Sellers From Oil and Gas Sector
GSO 1785:2013
Gulf Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications
OS GSO 1785:2013
GSO 1785:2013
Omani Standard
Lubricating Oils for Internal Combustion
Engines API Classifications
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)
OS GSO 672:2010
GSO 672:2010
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
Recently Published from Oil and Gas Sector
GSO 1785-2:2023
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline Engines and Diesel Engines
GSO ASTM D2272:2023
ASTM D2272:22
Gulf Standard
Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
GSO ISO 6246:2023
ISO 6246:2017
Gulf Standard
Petroleum products — Gum content of fuels — Jet evaporation method
GSO ISO 10101-3:2023
ISO 10101-3:2022
Gulf Standard
Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure