GSO OIML R69:2002
Gulf Technical Regulation
Current Edition
·
Approved on
21 October 2002
·
GLASS CAPILLARY VISCOMETERS FOR THE MEASUREMENT OF KINEMATIC VISCOSITY VERIFICATION METHOD
GSO OIML R69:2002 Files
Arabic
11 Pages
Current Edition
Free
English
7 Pages
Current Edition
Reference Language
Free
GSO OIML R69:2002 Scope
This Gulf standard sets out the method and means for initial and subsequent verifications of glass capillary viscometers (ordinary instruments), free liquid flow, intended for the measurement of kinematic viscosity of liquids.
The principle of verification consists in determining the constant of the viscometer, using a suitable and stable reference material of viscosity, the viscosity of which was measured using standard or reference viscometers.
The operations making it possible to determine the viscosity of the reference materials of viscosity and the constant of the viscometer should be carried out simultaneously, in the same thermostatic bath.
It is however admissible to carry out the verification of viscometers using reference materials of which the values of viscosity have been given by another laboratory. The verification of viscometers shall then be carried out at the temperature of measurement of the viscosity of the reference materials in question.
Other verification methods are accepted provided that they give similar results
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R76-1:2009
GSO OIML R 76-1:2009
Omani Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 12179:2024
ISO 12179:2021
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ISO 3455:2024
ISO 3455:2021
Gulf Standard
Hydrometry — Calibration of current-meters in straight open tanks