GSO ISO 7203-3:2007
ISO 7203-3:1999
Gulf Standard
Historical
·
Approved on
05 June 2007
Fire Extinguishing Media – Foam Concentrates – Part 3 : Specification For Low Expansion Foam Concentrates For Application to Water – Miscible Liquids
GSO ISO 7203-3:2007 Files
English
19 Pages
Historical
Reference Language
61.97 OMR
GSO ISO 7203-3:2007 Scope
This part of ISO 7203 is applicable to low expansion foam concentrates which conform to ISO 7203-1. It specifies
additional requirements to assess their suitability for use on water-miscible fuels.
In this part of ISO 7203, the fire performance is tested using acetone as fuel, which also forms the basis for the
performance classification. However, there are a large number of water-miscible liquids which have more or less
different properties compared to acetone. It has been shown by tests using other fuels that the performances of
various foams differ considerably. See clause 6.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this part of
ISO 7203. At the time of publication, the edition indicated was valid. All standards are subject to revision, and
parties to agreements based on this part of ISO 7203 are encouraged to investigate the possibility of applying the
most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid
International Standards.
ISO 7203-1: 1995, Fire protection — Fire extinguishing media — Foam concentrates — Part 1: Low expansion foam
concentrates for top application to water-immiscible liquids.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS


GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS


Recently Published from Mechanical Sector
GSO ECE R 51:2024
ECE R 51:2023
Gulf Standard
Uniform provisions concerning the approval of motor vehicles having at least four wheels with regard to their sound emissions

GSO ISO 13256-1:2024
ISO 13256-1:2021
Gulf Standard
Water-source heat pumps
— Testing and rating for performance
— Part 1: Water-to-air and brine-to-air heat pumps


GSO EN 13077:2024
EN 13077:2023
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B

GSO ASTM E2218:2024
ASTM E2218:23
Gulf Standard
Standard Test Method for Determining Forming Limit Curves

