GSO OIML R95:2008
OIML R 95:1990
Gulf Standard
Current Edition
·
Approved on
20 February 2008
Ships tanks - General Requirements
GSO OIML R95:2008 Files
Arabic
18 Pages
Current Edition
Free
English
15 Pages
Current Edition
Reference Language
Free
GSO OIML R95:2008 Scope
1.1. This Recommendation deals with ships' tanks used either for the transport and measurement of
liquid products in bulk, or for the storage and measurement of the fuel oil used by the ship herself,
that are subject to the control of the National Service of Legal Metrology.
Note: Ships used expressly for the transport of liquid products in bulk are normally known as
"tankers".
1.2. The measurement of the quantities of liquids transported by a tanker is a complex operation and is
generally less accurate than the measurement of liquid quantities in land-based tanks (see Annex 1).
1.3. This Recommendation lays down general requirements for tankers containing quantities subject
to legal measurement. It applies to measurements made in wholesale transactions. When, in a
particular country, barges and lighters are used for the reception and delivery of part loads and for
their measurement, the additional errors that may then occur shall be taken into consideration. It is
possible, in such cases, to specify a "minimum measurable height" (usually 500 mm) or a "minimum
measurable volume", which shall then be mentioned in the calibration certificate.
Best Sellers From Metrology Sector
OS GSO OIML R87:2021
OIML R87:2016
Omani Standard
Quantity of product in prepackages
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R79:2021
OIML R79:2015
Omani Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
OS GSO ISO 718:2007
ISO 718:1990
Omani Standard
LABORATORY GLASSWARE - THERMAL SHOCK AND THERMAL SHOCK ENDURANCE —TEST METHODS
GSO ISO 718:2007
ISO 718:1990
Gulf Standard
LABORATORY GLASSWARE - THERMAL SHOCK AND THERMAL SHOCK ENDURANCE —TEST METHODS
GSO ISO 23350:2025
ISO 23350:2021
Gulf Standard
Hydrometry — Catching-type liquid precipitation measuring gauges
GSO OIML R 60-1:2025
OIML R 60-1:2021
Gulf Standard
Metrological regulation for load cells — Part 1: Metrological and technical requirements