OS GSO IEC TS 62998-3:2024
IEC TS 62998-3:2023
Omani Standard
Current Edition
·
Approved on
14 October 2024
Safety of machinery - Safety-related sensors used for the protection of persons - Part 3: Sensor technologies and algorithms
OS GSO IEC TS 62998-3:2024 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
OS GSO IEC TS 62998-3:2024 Scope
IEC TS 62998-3:2023 gives guidance on:
- analysis of sensor technologies of different wavelength ranges, measurement methods, and the sensing unit arrangement in an SRS, respectively the arrangement of SRSs in an SRSS;
- representative physical properties of safety-related objects with due consideration of their material characteristics and the sensor technology/technologies used in an SRS/SRSS to achieve the detection capability and comparable results during verification and validation;
- analysis of the interference of objects present in the surrounding on the safety related objects and thereby the influence on the dependability of the detection capability;
- use of algorithms during design, development and maintenance to achieve appropriate detection capability and dependability of detection;
- appropriate use of algorithms during the integration of SRS or SRSS by the integrator to improve execution of measurement information or provide decision information derived from measurement information.
If an SRS/SRSS uses sensor technologies not stated in this document, then the generic approach in accordance with IEC TS 62998-1 applies.
- analysis of sensor technologies of different wavelength ranges, measurement methods, and the sensing unit arrangement in an SRS, respectively the arrangement of SRSs in an SRSS;
- representative physical properties of safety-related objects with due consideration of their material characteristics and the sensor technology/technologies used in an SRS/SRSS to achieve the detection capability and comparable results during verification and validation;
- analysis of the interference of objects present in the surrounding on the safety related objects and thereby the influence on the dependability of the detection capability;
- use of algorithms during design, development and maintenance to achieve appropriate detection capability and dependability of detection;
- appropriate use of algorithms during the integration of SRS or SRSS by the integrator to improve execution of measurement information or provide decision information derived from measurement information.
If an SRS/SRSS uses sensor technologies not stated in this document, then the generic approach in accordance with IEC TS 62998-1 applies.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
Recently Published from Electrical Sector
OS ISO 22366:2026
ISO 22366:2026
Omani Standard
Security and resilience — Community resilience — Framework and principles for energy resilience
OS IEC 62196-7:2026
IEC 62196-7:2026
Omani Standard
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 7: Vehicle adapters
OS IEC 63409-3:2026
IEC 63409-3:2025
Omani Standard
Photovoltaic power generating systems connection with the grid - Testing of power conversion equipment - Part 3: Basic operations
OS IEC 63379:2026
IEC 63379:2026
Omani Standard
Vehicle connector, vehicle inlet and cable assembly for megawatt DC charging