OS GSO EN 12201-4:2024

EN 12201-4:2012
Omani Standard   Current Edition · Approved on 25 April 2024

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves

OS GSO EN 12201-4:2024 Files

OS GSO EN 12201-4:2024 Scope

This Part of EN 12201 specifies the characteristics of valves or valve bodies made from polyethylene (PE 100 and PE 80) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. NOTE 1 For valves or valve bodies intended for drainage and sewerage under pressure, additional specifications/tests may be necessary according to the requirements of the purchaser, especially for the chemical resistance of the components in contact with the fluids and functioning characteristics. NOTE 2 For PE components intended for the conveyance of water for human consumption and raw water prior to treatment attention is drawn to 5.4. Components manufactured for water for other purposes may not be suitable for water supply for human consumption. It also specifies the test parameters for the test methods referred to in this European Standard. NOTE 3 Valves made from material other than polyethylene (PE) designed for the supply of water intended for human consumption to a relevant standard(s) can be used in PE piping systems conforming to EN 12201 when they have relevant PE connection for butt fusion or electrofusion ends (see EN 12201-3:2011). In conjunction with Parts 1, 2, 3 and 5 of EN 12201 it is applicable to PE valves, their joints and to joints with components of PE and other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar ) b) an operating temperature of 20 °C as a reference temperature; c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. NOTE 4 For applications operating at constant temperature greater than 20 °C and up to 40 °C, see EN 12201 1:2011, Annex A. EN 12201 covers a range of allowable operating pressures and gives requirements concerning colours and additives. NOTE 5 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes. This Part of EN 12201 covers valves for pipes with a nominal outside diameter dn ≤ 315 mm.

Best Sellers From Chemical and Textile Sector

OS GSO 1943:2024
GSO 1943:2024 
Omani Standard
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 1943:2024
 
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 151:2022
 
Gulf Standard
Synthetic Detergents –Household Synthetic Detergents Powder
OS GSO 151:2022
GSO 151:2022 
Omani Standard
Synthetic Detergents –Household Synthetic Detergents Powder

Recently Published from Chemical and Textile Sector

OS 1659:2025
 
Omani Standard
Traditional Oman Ships
OS 1654:2025
 
Omani Standard
Cosmetics - Henna Paste for Adornment
GSO 276:2003
 
Gulf Standard
METHODS OF TESTING OF HEAD CLOTH FOR MEN — COTTON SHEMAGH AND POLYESTER SHEMAGH BLENDED OR COTTON SYNTHETIC FIBRES SHEMAGH
GSO 538:1994
 
Gulf Standard
Machine - made textile floor covenings - determination of mass per unit area.