OS GSO ECE 144:2023
ECE 144:2020
Omani Standard
Current Edition
·
Approved on
03 May 2023
Uniform provisions concerning the Accident Emergency Call Systems (AECS)
OS GSO ECE 144:2023 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
OS GSO ECE 144:2023 Scope
1.1. This UN Regulation applies to:
(a) Part Ia: the approval of Accident Emergency Call Components (AECC) which are intended to be fitted as part of an Accident Emergency Call Device (AECD).
(b) Part Ib:
(i) The approval of AECDs which are intended to be fitted to vehicles of categories M1 and N1.;.1
(ii) At the request of the applicant, the approval of AECDs which are intended to be fitted to vehicles of other vehicle categories.
(c) Part II: the approval of vehicles of categories M1 and N11 with regard to their Accident Emergency Call System (AECS) when equipped with an AECD which has been approved to Part Ib of this Regulation.
(d) Part III: the approval of vehicles of categories M1 and N11 with regard to their AECS when equipped with an AECD which has not been separately approved according to Part Ib of this Regulation.
1.2. It does not apply to:
(a) Communication module functionality and communication antenna functionality, unless otherwise prescribed in this Regulation;
(b) The additional data to the Minimum Set of Data (MSD) to be convened to Public Service Answering Party (PSAP), the format of the data, the mechanism and logic of data transmission, data exchange protocol, operation modes and conditions of transitions between such modes, performance of the test call and test data transfer, response to protocol commands received from infrastructure and network registration logic;
(c) Privacy, data protection and personal data processing;
(d) Periodical Technical Inspection (PTI);
(e) Automatic triggering of AECS in case of vehicle rollover.
1.3. Vehicles,
(a) In the scope of neither UN Regulation No. 94 nor UN Regulation No. 95 and not fitted with an automatic triggering of an AECS;
(b) Of category M1 with a total permissible mass above 3.5 t; and
(с) Armoured vehicles1
shall be excluded from the scope of this Regulation.
1.4. Global Navigation Satellite System (GNSS) position determination may be approved at the request of the applicant.
However, if the applicant opts to request approval of a AECD/AECS or AECC without the GNSS positioning as described in this Regulation, national requirements of the Contracting Parties apply.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
GSO EN 1514-4:2026
EN 1514-4:1997
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
GSO EN 10217-6:2026
EN 10217-6:2019
Gulf Standard
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties