OS GSO ISO 22282-5:2017
Omani Standard
Current Edition
·
Approved on
03 October 2017
·
Geotechnical investigation and testing -- Geohydraulic testing -- Part 5: Infiltrometer tests
OS GSO ISO 22282-5:2017 Files
English
21 Pages
Current Edition
Reference Language
35.2 OMR
OS GSO ISO 22282-5:2017 Scope
This part of ISO 22282 establishes requirements for ground investigations by means of infiltrometer tests as part of geotechnical investigation services in accordance with EN 1997-1 and EN 1997-2.
It applies to the in situ determination of the water permeability of an existing geological formation or of treated or compacted materials.
The infiltrometer test is used to determine the infiltration capacity of the ground at the surface or shallow depth. It is a simple test for determining the permeability coefficient. The method can be applied using either steady-state or transient conditions, in saturated or unsaturated soils.
The principle of the test is based on the measurement of a surface vertical flow rate of water which infiltrates the soil under the influence of a positive hydraulic head.
Surface infiltration devices include single and double-ring infiltrometer designs of the open or closed type.
The measurement devices and measurement procedures are adapted to different ranges of permeability. Open systems are adapted to permeability ranges from 10−5 to 10−8 m/s and closed systems for permeability lower than 10−8.
Depending on the environmental conditions and the water permeability of the soil, a duration of a few minutes to a few days is needed to run the test.
This part of ISO 22282 defines the terminology and the measured parameters. It specifies the required characteristics of the equipment, defines the procedures of the tests relating to the different measurement techniques and specifies the tests results.
It is applicable to:
— civil engineering projects;
— hydrogeology studies; and
— waste storage.
Best Sellers From Construction and Building Sector
OS GSO 938:2009
GSO 938:2009
Omani Standard
Test Methods for Chemical Properties of Portland Cement
GSO 938:2009
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
OS GSO 1915:2009
GSO 1915:2009
Omani Standard
Test Methods for Physical Properties of Portland Cement
ICS :
GSO 1915:2009
Gulf Standard
Test Methods for Physical Properties of Portland Cement
ICS :
Recently Published from Construction and Building Sector
GSO ASTM C31/C31M:2023
ASTM C31/C31M:22
Gulf Standard
Standard Practice for Making and Curing Concrete Test Specimens in the Field
GSO ASTM C33/C33M:2023
ASTM C33/C33M:18
Gulf Standard
Standard Specification for Concrete Aggregates
GSO ASTM A1063/A1063M:2023
ASTM A1063/A1063M:22
Gulf Standard
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
GSO ASTM C1352/C1352M:2023
ASTM C1352/C1352M:21
Gulf Standard
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone