OS GSO ISO/TR 16806:2017

Omani Standard   Current Edition
· Approved on 03 October 2017 ·

Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method

OS GSO ISO/TR 16806:2017 Files

English 12 Pages
Current Edition Reference Language

OS GSO ISO/TR 16806:2017 Scope

1.1 This Technical Report describes how to calculate the loading limits for a pneumatic slide based upon: — external forces applied in the three principle planes of a tool plate, and applied at any point; — external torque applied in the three principle planes of a tool plate; — bearing limits determined by the slide manufacturer in conjunction with the bearing supplier. 1.2 This Technical Report also describes how to calculate tool plate deflections due to the loads. 1.3 This Technical Report describes how to present the rating information in technical documentation for application by a user. 1.4 This Technical Report assumes that all of the applied loads and torque will be absorbed by the guide rods and not by the piston rod. Only the axial thrust load (but not the resulting moments) will be absorbed by the piston rod.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ASTM D4778:2024
ASTM D4778:15 
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022 
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021 
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 21384-2:2024
ISO 21384-2:2021 
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components