OS GSO ISO 13857:2015
ISO 13857:2008
Omani Standard
Current Edition
·
Approved on
03 September 2015
Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs
OS GSO ISO 13857:2015 Files
English
17 Pages
Current Edition
Reference Language
OMR
46.24
OS GSO ISO 13857:2015 Scope
This International Standard establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see 4.3).
This International Standard covers people of 14 years and older (the 5th percentile stature of 14 year olds is approximately 1400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openings needs to be addressed.
NOTE 1 Data for preventing lower limb access for children is not considered.
The distances apply when adequate safety can be achieved by distance alone. Because safety distances depend on size, there will be some people of extreme dimensions who will be able to reach hazard zones even when the requirements of this International Standard are complied with.
NOTE 2 These safety distances will not provide sufficient protection against certain hazards, for example, radiation and emission of substances. For such hazards, additional or other measures need to be taken.
The clauses of the International Standard covering lower limbs apply when access by the upper limbs is not foreseeable according to the risk assessment.
The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1).
NOTE 3 This International Standard is not intended to provide measures against reaching a hazard zone by climbing over.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 5393:2026
ISO 5393:2017
Gulf Standard
Rotary tools for threaded fasteners — Performance test method
GSO ISO 11681-2:2026
ISO 11681-2:2022
Gulf Standard
Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials