OS GSO ISO 17664:2014

Omani Standard   ACTIVE

Sterilization of medical devices -- Information to be provided by the manufacturer for the processing of resterilizable medical devices

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope
This standard specifies the information to be provided by the medical device manufacturer on the processing of medical devices claimed to be re-sterilizable and medical devices intended to be sterilized by the processor. This standard specifies requirements for the information to be provided by the medical device manufacturer, so that the medical device can be processed safely and will continue to meet its performance specification. Requirements are specified for processing that consists of all or some of the following activities: — preparation at the point of use; — preparation, cleaning, disinfection; — drying; — inspection, maintenance and testing; — packaging; — sterilization; — storage. When providing instructions for these activities, medical device manufacturers are expected to be aware of the training and knowledge of procedures, and of the processing equipment available to the persons likely to be responsible for processing. It is likely that some processing procedures will be generic and well known and will use equipment and consumables conforming to recognized standards. In this case, a reference in the instructions is all that is required. For those medical devices where instructions for use are not required to accompany the medical device, other means of communicating the information can be used, e.g. user manuals, symbols or wall charts supplied separately. This standard excludes textile devices used in patient draping systems or surgical clothing. NOTE The principles of this standard may be applied when considering the information to be supplied with medical devices which only require disinfection prior to re-use.
Endorsement
ISO 17664:2004
25 December 2014
Sterilization and disinfection in general
Including sterilization methods, air quality of surgery rooms, etc.

Files

English
18 Pages
36.54 OMR
 

Best Sellers From Health Sector

OS GSO ISO 17664:2014
ISO 17664:2004 
Omani Standard
Sterilization of medical devices -- Information to be provided by the manufacturer for the processing of resterilizable medical devices
OS GSO ISO 15223-1:2020
ISO 15223-1:2016 
Omani Standard
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements
GSO ISO 17664:2014
ISO 17664:2004 
Gulf Standard
Sterilization of medical devices -- Information to be provided by the manufacturer for the processing of resterilizable medical devices
GSO ISO 15223-1:2020
ISO 15223-1:2016 
Gulf Standard
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements

Recently Published from Health Sector

GSO IEC 60601-2-2:2021
IEC 60601-2-2:2017 
Gulf Standard
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
GSO IEC 60747-14-10:2021
IEC 60747-14-10:2019 
Gulf Standard
Semiconductor devices - Part 14-10: Semiconductor sensors - Performance evaluation methods for wearable glucose sensors
GSO EN 1639:2021
EN 1639:2009 
Gulf Standard
Dentistry — Medical devices for dentistry —Instruments
GSO ASTM D3578:2021
ASTM D3578-05 
Gulf Standard
Standard Specification for Rubber Examination Gloves