OS GSO IEC 61124:2014

Omani Standard   Current Edition
Approved on  25 December 2014

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

Characteristics and design of machines, apparatus, equipment
Including reliability, dependability, maintainability, durability, etc.

OS GSO IEC 61124:2014 Files

OS GSO IEC 61124:2014 Scope

This International Standard gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of – failure rate, – failure intensity, – mean time to failure (MTTF), – mean operating time between failures (MTBF), conforms to a given requirement. It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is constant. Four types of test plans are described as follows: – truncated sequential tests; – time/failure terminated tests; – fixed calendar time terminated tests without replacement; – combined test plans. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60300-3-5.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016 
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007 
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES

Recently Published from Electrical Sector

GSO IEC TS 62600-30:2023
IEC TS 62600-30:2018 
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 30: Electrical power quality requirements
GSO IEC TR 61400-12-4:2023
IEC TR 61400-12-4:2020 
Gulf Standard
Wind energy generation systems - Part 12-4: Numerical site calibration for power performance testing of wind turbines
GSO IEC 61757-4-3:2023
IEC 61757-4-3:2020 
Gulf Standard
Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method
GSO IEC 60358-2:2023
IEC 60358-2:2013 
Gulf Standard
Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application