OS GSO 1914:2009

Omani Standard   ACTIVE

Portland Cement

Scope
This GSO standard is concerned with the following eight types of Portland cement: 1. Type I cement (ordinary) - for use when the special properties specified for any other type are not required. 2. Type IA – Air-entraining cement for the same uses as type I, where air-entrainment is desired. 3. Type II cement - For general purposes, more especially when moderate sulphate resistance or moderate heat of hydration is desired. 4. Type IIA – Air-entraining cement for the same uses as type II, where airentrainment is desired. 5. Type III – For use when high early strength is desired. 6. Type IIIA – Air-entraining cement for the same use as type III, where airentrainment is desired. 7. Type IV – For use when a low heat of hydration is desired. 8. Type V – For use when high sulphate resistance is desired. Common cements are grouped in the European standard EN 197-1:2000 into (5) major types according to composition. Further they are further divided into (2) major classes according to pressure resistance as stipulated in tables (1) and (2) referred to in Attachment (1).
Prepare
GSO 1914:2009
11 February 2009
Construction materials
Including sustainability of construction materials

Files

 

Related Standards

Replaces
OS GSO 488:1994
 
REPLACED
Omani Standard
White Portland cement.

Best Sellers From Construction and Building Sector

OS GSO 1914:2009
GSO 1914:2009 
Omani Standard
Portland Cement
GSO 1914:2009
 
Gulf Standard
Portland Cement
GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
OS GSO 938:2009
GSO 938:2009 
Omani Standard
Test Methods for Chemical Properties of Portland Cement

Recently Published from Construction and Building Sector

GSO EN 12860:2021
EN 12860:2001 
Gulf Standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
GSO EN 13501-2:2021
EN 13501-2:2016 
Gulf Standard
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
GSO EN 13658-2:2021
EN 13658-2:2005 
Gulf Standard
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
GSO EN 13892-1:2021
EN 13892-1:2002 
Gulf Standard
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test