ISO 636:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٤ سبتمبر ٢٠٢٤

Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification

ملفات الوثيقة ISO 636:2024

الإنجليزية 13 صفحات
الإصدار الحالي
47.43 OMR

مجال الوثيقة ISO 636:2024

This document specifies requirements for classification of rods, wires and deposits in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine-grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.

This document is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.

a)       Components which carry the suffix “system A” are applicable only to rods, wires and deposits classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this document.

b)       Components which carry the suffix “system B” are applicable only to rods, wires and deposits classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this document.

c)        Components which have neither the suffix “system A” nor the suffix “system B” are applicable to all rods, wires and deposits classified in accordance with this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 37303:2025
 
مواصفة قياسية دولية
Compliance management systems — Guidance for competence management
ISO 37302:2025
 
مواصفة قياسية دولية
Compliance management systems — Guidance for the evaluation of effectiveness
ISO 21740:2025
 
مواصفة قياسية دولية
Space systems — Launch window estimation and collision avoidance
ISO 7899-3:2025
 
مواصفة قياسية دولية
Water quality — Enumeration of intestinal enterococci — Part 3: Most probable number method