ISO 13610:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٢ يوليو ٢٠٢٥

Sludge recovery, recycling, treatment and disposal — Determination of calorific value of sludge

ملفات الوثيقة ISO 13610:2025

الإنجليزية 16 صفحات
الإصدار الحالي
OMR 46.66

مجال الوثيقة ISO 13610:2025

This document specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid.

The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludge is burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. The net calorific value at constant volume can also be used, equations for the calculation are given only as this requires less additional determinations.

This method is applicable to all kinds of sludge.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 9:2022
GSO 9:2022 
مواصفة قياسية عمانية
بطاقات المواد الغذائية المعبأة
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة

اعتمدت مؤخراً

ISO 18615-1:2026
 
مواصفة قياسية دولية
Traditional Chinese medicine — Electric radial pulse tonometric devices — Part 1: General requirements
ISO 21388-1:2026
 
مواصفة قياسية دولية
Acoustics — Hearing aid fitting management (HAFM) — Part 1: General process
ISO 20915:2026
 
مواصفة قياسية دولية
Life cycle inventory calculation methodology for steel products
ISO 11607-3:2026
 
مواصفة قياسية دولية
Packaging for terminally sterilized medical devices — Part 3: Requirements for process development for forming, sealing and assembly