ISO/TS 7344:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٤ مارس ٢٠٢٤

Short-range wireless sensor to device communication

ملفات الوثيقة ISO/TS 7344:2024

الإنجليزية 9 صفحات
الإصدار الحالي
31.04 OMR

مجال الوثيقة ISO/TS 7344:2024

This document specifies short-range wireless active communication between two active IoT/telematic hardware items, such as a gateway device and/or a sensor.

NOTE            Active hardware item in this document refers to devices and sensors, which have capacity to record and transmit measurements, i.e. data, without external activation through extra accessories, e.g. readers or scanners.

The application of such communications is based on equipment and container type. This document covers the following:

     wireless technology choices for wireless communication involving active hardware items, i.e. sensor to device communication;

     critical design factors of containers and hardware items intended to be used within one container environment;

     parameters for open protocol communication and possible applications (use cases).

This document does not define installation locations for devices and sensors; however, it is expected that the hardware items are installed on or in the container, based on the following considerations:

     existing regulations and standards;

     container design, and specification of the material it is made of;

     best possible connection, which enables interoperable communication between sensor and device;

     cargo and personnel safety.

Due to the pace of technology development, the number of connected sensors to one gateway device are not defined in this document. This document assumes that at least one sensor can be connected to at least one gateway device wirelessly.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20589:2025
 
مواصفة قياسية دولية
Glass in building — Determination of the emissivity
ISO 11265:2025
 
مواصفة قياسية دولية
Environmental solid matrices — Determination of the specific electrical conductivity
ISO 11465:2025
 
مواصفة قياسية دولية
Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 9350:2025
 
مواصفة قياسية دولية
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure