ISO 16090-1:2022

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  01 ديسمبر 2022

Machine tools safety — Machining centres, milling machines, transfer machines — Part 1: Safety requirements

السلامة في استخدام الآلات
* تشمل هذه المجموعة فقط مواصفات السلامة بصفة عامة

ملفات الوثيقة ISO 16090-1:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 16090-1:2022

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of:

    milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2);

    machining centres; and

    transfer machines (see 3.1.3)

designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 190851 and glass, stone and engineered/agglomerated materials as defined in EN 14618.

This document covers the following machines (referred to as "machines" in this document):

a)    manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);

b)    manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);

c)     numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7);

d)    transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13).

e)    machines fitted with the following devices/facilities, whose hazards have been dealt with:

    tool magazine(s);

    tool changer(s);

    workpiece handling mechanism(s);

    powered workpiece clamping mechanism(s);

    swarf/chip conveyor(s);

    power-operated door(s);

    moveable operator cabin(s);

    additional equipment for turning;

    additional equipment for grinding.

This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).

This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

الأكثر مبيعاً

GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 3262-13:2023
مواصفة قياسية دولية
Extenders — Specifications and methods of test — Part 13: Natural quartz (ground)
ISO 17386:2023
مواصفة قياسية دولية
Intelligent transport systems — Manoeuvring aids for low-speed operation (MALSO) — Performance requirements and test procedures
ISO 22932-4:2023
مواصفة قياسية دولية
Mining — Vocabulary — Part 4: Prospecting and exploration
ISO/TS 32003:2023
مواصفة قياسية دولية
Document management — Portable Document Format — Adding support of AES-GCM in PDF 2.0