ISO 16281:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٠ يناير ٢٠٢٥

Rolling bearings — Methods for calculating the modified reference rating life for universally loaded rolling bearings

ملفات الوثيقة ISO 16281:2025

الإنجليزية 36 صفحات
الإصدار الحالي
84.93 OMR

مجال الوثيقة ISO 16281:2025

This document defines the calculation of the modified reference rating life taking into consideration lubrication, contamination, and fatigue load limit of the bearing material, as well as tilting or misalignment, operating clearance of the bearing and internal load distribution on rolling elements. The calculation method provided in this document covers influencing parameters additional to those described in ISO 281.

The general directions and limitations given in ISO 281 apply to this document. The calculation methods pertain to the fatigue life of the bearings. Other mechanisms of failure, like wear or microspalling (gray-staining), lie outside the scope of this document.

This document applies to single- and multi-row radial and thrust ball bearings, subjected to radial and axial load and with radial clearance and tilt taken into account. It also applies to single- and multi-row radial and thrust roller bearings, subjected to radial and axial load and with radial clearance, edge stress and tilt taken into account. References to methods for the analysis of the internal load distribution under general load are given.

The calculation of load distribution and basic reference rating life is also applicable to hybrid bearings, using the dynamic load ratings per ISO 20056-1[2]. The calculation of the modified reference rating life is not applicable to hybrid bearings.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20589:2025
 
مواصفة قياسية دولية
Glass in building — Determination of the emissivity
ISO 11265:2025
 
مواصفة قياسية دولية
Environmental solid matrices — Determination of the specific electrical conductivity
ISO 11465:2025
 
مواصفة قياسية دولية
Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 9350:2025
 
مواصفة قياسية دولية
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure