ISO 34503:2023

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٨ أغسطس ٢٠٢٣

Road Vehicles — Test scenarios for automated driving systems — Specification for operational design domain

ملفات الوثيقة ISO 34503:2023

الإنجليزية 29 صفحات
الإصدار الحالي
65.25 OMR

مجال الوثيقة ISO 34503:2023

This document specifies the requirements for the hierarchical taxonomy for specifying operating conditions which enable the definition of an operational design domain (ODD) of an automated driving system (ADS). This document also specifies requirements for the definition format of an ODD using the taxonomy. The ODD comprises specific conditions (which include the static and dynamic attributes) within which an ADS is designed to function.

This document is mainly applicable to level 3 and level 4 ADS. An ODD for level 5 ADS is unlimited (i.e. operation is possible everywhere).

This document can be used by organizations taking part in developing safety cases for automated vehicles, in particular, for organizations conducting trials, testing and commercial deployment. This document can also be used by manufacturers of level 3/4 ADS to define the ADS’ operating capability. It may also be of interest to insurers, regulators, service providers, national, local and regional governments to enable them to understand possible ADS deployments and capabilities.

This document does not cover the basic test procedures for attributes of the ODD. It does not cover the monitoring requirements of the ODD attributes.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/ASTM TS 52949:2025
 
مواصفة قياسية دولية
Additive manufacturing of metals — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment
ISO/TS 7815-2:2025
 
مواصفة قياسية دولية
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface
ISO 3506-4:2025
 
مواصفة قياسية دولية
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes
ISO 5700:2025
 
مواصفة قياسية دولية
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions