ISO 17636-2:2022

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  01 سبتمبر 2022

Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors

وصلات اللحام
* تشمل مواقع اللحام والاختبارات الميكانيكية وغير المتلفة لوصلات اللحام

ملفات الوثيقة ISO 17636-2:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 17636-2:2022

This document specifies techniques of digital radiography with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject.

This document applies to the digital radiographic testing of fusion welded joints in metallic materials. It applies to the joints of plates and pipes. Besides its conventional meaning, “pipe”, as used in this document, covers other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels.

This document specifies the requirements for digital radiographic X- and gamma-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDAs) of the welded joints of metallic plates and tubes for the detection of imperfections. It includes manual and automated inspection with DDAs.

Digital detectors provide a digital grey value image which can be viewed and evaluated using a computer (Annex E). This document specifies the recommended procedure for detector selection and radiographic practice. Selection of computer, software, monitor, printer and viewing conditions are important, but are not the main focus of this document. The procedure specified in this document provides the minimum requirements for radiographic practice which permits exposure and acquisition of digital radiographs with equivalent sensitivity for the detection of imperfections as film radiography (specified in ISO 17636-1).

This document does not specify acceptance levels for any of the indications found on the digital radiographs. ISO 10675 provides information on acceptance levels for weld inspection.

If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 23774:2023
 
مواصفة قياسية دولية
Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration
ISO 233-3:2023
 
مواصفة قياسية دولية
Information and documentation — Transliteration of Arabic characters into Latin characters — Part 3: Persian language — Transliteration
ISO 23772:2023
 
مواصفة قياسية دولية
Pulps — Kraft liquor — Determination of residual alkali using potentiometric titration
ISO/IEC 30134-7:2023
 
مواصفة قياسية دولية
Information technology — Data centres key performance indicators — Part 7: Cooling efficiency ratio (CER)