ISO/TS 10839:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٢ يوليو ٢٠٢٢

Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation

ملفات الوثيقة ISO/TS 10839:2022

الإنجليزية 33 صفحات
الإصدار الحالي
75.04 OMR

مجال الوثيقة ISO/TS 10839:2022

This document presents a code of practice dealing with polyethylene (PE) pipes and fittings for buried pipeline systems outside buildings, conforming to the ISO 4437 series, and designed to transport gaseous fuels [as defined in ISO 4437-1, e.g. methane, liquified petroleum gas (LPG), manufactured gas and hydrogen] within the temperature range –20 °C to +40 °C. This document also gives appropriate temperature-related requirements.

The code of practice covers mains and service lines whose components are prepared for fusion or mechanical jointing. It also gives instructions for the design, storage, handling, transportation, laying conditions and fusion quality control of PE pipes and fittings as well as subsequent joint testing, backfilling, pipe system testing and commissioning.

NOTE      For the renovation code of practice, reference is made to the ISO 11299 series and to ISO 11295 for classification and to the ISO 21225 series for further information for trenchless replacement.

The minimal requirements for the jointing methods are given in:

—    Annex A (butt fusion);

—    Annex B (electrofusion); and

—    Annex C (mechanical jointing).

In some countries the use of heated-tools socket and saddle fusion is permitted; information on heated-tools fusion jointing techniques is given in Annex D.

In the case of ground movement or shaking (e.g. earthquakes, etc.) it can be necessary to implement precautions mentioned in this document following guidelines provided by authorities (e.g. Eurocode 8,[7] EN 12007-1:2012, Annex A,[8] etc.),

Workers' health and safety issues are outside the scope of this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 16408:2025
 
مواصفة قياسية دولية
Dentistry — Oral care products — Oral rinses
ISO 16383-1:2025
 
مواصفة قياسية دولية
Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content
ISO 2361:2025
 
مواصفة قياسية دولية
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
ISO/TS 6226:2025
 
مواصفة قياسية دولية
Health informatics — Reference architecture for syndromic surveillance systems for infectious diseases