ISO 22946:2020

مواصفة قياسية دولية   PUBLISHED

Nuclear criticality safety — Solid waste excluding irradiated and non-irradiated nuclear fuel

المجال

This document provides specific requirements and guidance on the nuclear criticality safety of waste containing fissile nuclides, generated during normal operations. This document is intended to be used along-side and in addition to ISO 1709.

This document applies specifically to the nuclear criticality safety of solid nuclear wastes. It also applies to residual quantities of liquids and/or slurries which are either intimately associated with the solid nuclear waste materials or arise as a result of processing or handling the waste.

This document does not apply to bulk or process liquids (including higher concentration process solutions) or irradiated or un-irradiated fuel elements.

NOTE The term fuel element is sometimes applied to fuel assembly, fuel bundle, fuel cluster, fuel rod, fuel plate, etc. All these terms are based on one or more fuel elements. A cylindrical fuel rod (sometimes referred to as a fuel pin) for a light-water-reactor is an example of a fuel element.

All stages of the waste life cycle are within the scope of the document. This document can also be applied to the transport of solid nuclear waste outside the boundaries of nuclear establishments.

إعداد
08 يناير 2020
مواد انشطارية
* تشمل المواد الخام * النفايات ذات النشاط الإشعاعي، انظر 13.030.30

الملفات

 

الأكثر مبيعاً

OS GSO 9:2013
GSO 9:2013 
مواصفة قياسية عمانية
بطاقات المواد الغذائية المعبأة
GSO 9:2013
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية

اعتمدت مؤخراً

ISO 20519:2021
 
مواصفة قياسية دولية
Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels
ISO 4259-4:2021
 
مواصفة قياسية دولية
Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory
ISO/TS 20388:2021
 
مواصفة قياسية دولية
Biotechnology — Biobanking — Requirements for animal biological material
ISO 21111-11:2021
 
مواصفة قياسية دولية
Road vehicles — In-vehicle Ethernet — Part 11: Application layer to session layer conformance test plans