ISO 11611:2024

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 18 يونيو 2024 ·

Protective clothing for use in welding and allied processes

ملابس الوقاية
* تشمل الملابس الواقية ضد الحريق. طوق النجاة البحري

ملفات الوثيقة ISO 11611:2024

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 11611:2024

This document specifies minimum safety requirements and test methods for protective clothing including hoods, aprons, sleeves, and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this document is only applicable to hoods and gaiters. This document does not cover requirements for feet, hand, face, and/or eye protectors.

This type of protective clothing is intended to protect the wearer against the following hazards:

     spatter (small splashes of molten metal) in 2 risk levels, short contact time with flame, radiant heat from an electric arc used for welding and allied processes,

     harmful artificial optical radiation (UV-A, UV-B and especially UV-C) in 3 risk levels generated during welding and allied processes and

     minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling, or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages.

The main manual welding processes are exemplified and are classified into process groups according to the maximum effectively emitted total irradiance, which has been determined and evaluated by measurement for these types of welding processes.

For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands, and feet.

This document is not applicable for laser welding processes (coherent, monochromatic radiation sources).

Guidance for the selection of protective clothing for different welding activities is detailed in Annex B.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO/IEC 5152:2024
 
مواصفة قياسية دولية
Information technology — Biometric performance estimation methodologies using statistical models
ISO/TS 6838:2024
 
مواصفة قياسية دولية
Ophthalmic optics — Contact lenses — Tolerances and methods for measurement of multifocal contact lens addition power
ISO 10253:2024
 
مواصفة قياسية دولية
Water quality — Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum
ISO 23138:2024
 
مواصفة قياسية دولية
Biological equipment for treating air and other gases — General requirements