ISO 22475-1:2021

مواصفة قياسية دولية   PUBLISHED

Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for the sampling of soil, rock and groundwater

المجال

This document deals with principles of sampling of soil, rock and groundwater as part of the programme of geotechnical investigation and testing.

NOTE 1    This document fulfils the requirements for sampling of soil, rock and groundwater, and groundwater measurements as part of the programme of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2.

The aims of such ground investigations are:

a) to recover soil, rock and water samples of a quality appropriate to assess the general suitability of a site for geotechnical engineering purposes and to determine the required ground characteristics in the laboratory;

b) to obtain information on the sequence, thickness and orientation of strata and discontinuities;

c) to establish the type, composition and condition of strata;

d) to obtain information on groundwater conditions and recover water samples for assessment of the interaction of groundwater, soil, rock and construction material.

Soil sampling for the purposes of agricultural and environmental soil investigation is not covered.

NOTE 2    Guidance on soil sampling for these purposes including of contaminated or potentially contaminated sites is provided in the ISO 18400 series. ISO 18400-204 provides in addition guidance on sampling and measurement of soil (ground) gas.

NOTE 3    The sampling methods, presented in this document may not be suitable for all types of soil e.g. peat with strong fibrous structure.

NOTE 4    Some of the sampling methods presented in this document are suitable for both soil and rock.

Water sampling for the purposes of quality control, quality characterisation and identification of sources of pollution of water, including bottom deposits and sludges, is not covered.

NOTE 5    Water sampling for these purposes can be found in the ISO 5667 series.

إعداد
05 أكتوبر 2021
أعمال الأرضيات والأساسات والأعمال في أعماق الأرض
* تشمل التقنيات الأرضية * معدات تحريك التربة، انظر 53.100

الملفات

null صفحات
null null
 

المواصفات ذات العلاقة

revises
ISO 22475-1:2006
 
مسحوبة
مواصفة قياسية دولية
Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for execution

الأكثر مبيعاً

OS GSO 9:2013
GSO 9:2013 
مواصفة قياسية عمانية
بطاقات المواد الغذائية المعبأة
GSO 9:2013
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية

اعتمدت مؤخراً

ISO 20519:2021
 
مواصفة قياسية دولية
Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels
ISO 4259-4:2021
 
مواصفة قياسية دولية
Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory
ISO/TS 20388:2021
 
مواصفة قياسية دولية
Biotechnology — Biobanking — Requirements for animal biological material
ISO 21111-11:2021
 
مواصفة قياسية دولية
Road vehicles — In-vehicle Ethernet — Part 11: Application layer to session layer conformance test plans