ISO 19085-14:2021

مواصفة قياسية دولية   PUBLISHED

Woodworking machines — Safety — Part 14: Four-sided moulding machines

المجال

This document gives the safety requirements and measures for four-sided moulding machines, capable of continuous production use, with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, hereinafter referred to as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).

It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.

It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with:

—    universal spindle;

—    glass bead saw unit;

—    fixed or movable workpiece support;

—    quick tool changing system;

—    laser marking unit;

—    automatic workpiece returner;

—    in-feed hopper;

—    loading magazine;

—    unloading table.

This document does not deal with any hazards related to:

a) in-feed devices other than in-feed hopper and loading magazine;

NOTE 1      For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4.

b) out-feed devices other than unloading table, except for hazards related to ejection from the machine due to climb cutting;

c) out-feed of workpieces on machines with feed speed higher than 60 m/min;

NOTE 2      Machines with feed speed higher than 60 m/min are usually combined with mechanical unloading and workpiece transfer systems.

d) machines being used in combination with any other machine (as part of a line).

It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.

إعداد
15 أكتوبر 2021
ألات النجارة
* سلسلة المناشير والمناشير ذات الفرشاة، انظر 65.060.80
السلامة في استخدام الآلات
* تشمل هذه المجموعة فقط مواصفات السلامة بصفة عامة

الملفات

null صفحات
null null
 

الأكثر مبيعاً

OS GSO 9:2013
GSO 9:2013 
مواصفة قياسية عمانية
بطاقات المواد الغذائية المعبأة
GSO 9:2013
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية

اعتمدت مؤخراً

ISO 20519:2021
 
مواصفة قياسية دولية
Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels
ISO 4259-4:2021
 
مواصفة قياسية دولية
Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory
ISO/TS 20388:2021
 
مواصفة قياسية دولية
Biotechnology — Biobanking — Requirements for animal biological material
ISO 21111-11:2021
 
مواصفة قياسية دولية
Road vehicles — In-vehicle Ethernet — Part 11: Application layer to session layer conformance test plans