ISO 19283:2020

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 20 أبريل 2020 ·

Condition monitoring and diagnostics of machines — Hydroelectric generating units

الاهتزازات. قياس الصدم والاهتزاز
* تشمل أجهزة القياس وتركيبها * الاهتزازات المتعلقة بالإنسان، انظر 13.160 * التوازن وآلات التوازن، انظر 21.120.40 * حماية المباني من الاهتزازات، انظر 91.120.25
هندسة الطاقة المائية
* تشمل التوربينات الهيدروليكية

ملفات الوثيقة ISO 19283:2020

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 19283:2020

This document focuses on recommended condition monitoring techniques for detecting and diagnosing developing machine faults associated with the most common potential failure modes for hydro unit components. It is intended to improve the reliability of implementing an effective condition monitoring approach for hydroelectric generating units (hydro units). It is also intended to help create a mutual understanding of the criteria for successful hydro unit condition monitoring and to foster cooperation between the various hydropower stakeholders.

This document is intended for end-users, contractors, consultants, service providers, machine manufacturers and instrument suppliers.

This document is machine-specific and is focused on the generator, shaft/bearing assembly, runner (and impeller for pumped storage applications), penstock (including the main inlet valve), spiral case and the upper draft tube of hydro units. It is primarily intended for medium to large sized hydro units with more than 50 MVA installed capacity, but it is equally valid for smaller units in many cases. It is applicable to various types of turbines such as Francis, Kaplan, Pelton, Bulb and other types. Generic auxiliary systems such as for lubrication and cooling are outside the scope, with the exception of some monitoring techniques that are related to condition monitoring of major systems covered by this document, such as oil analysis. Transmission systems, civil works and the foundation are outside the scope.

This document covers online (permanently installed) and portable instrument condition monitoring and diagnostic techniques for operational hydro units. Offline machine testing, i.e. that which is only done during shutdown, although very important, is not part of the scope of this document. Nor is one-time acceptance and performance testing within the scope. The condition monitoring techniques presented in this document cover a wide range of continuous and interval-based monitoring techniques under generalized conditions for a wide range of applications. Therefore, the actual monitoring approach required for a specific application can be different than that which is recommended in this generalized document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 2930:2024
 
مواصفة قياسية دولية
Raw, natural rubber — Determination of the plasticity retention index (PRI)
ISO/TR 22762-7:2024
 
مواصفة قياسية دولية
Elastomeric seismic-protection isolators — Part 7: Relationship of the ISO 22762 series to the design and testing of seismic isolation systems
ISO 10714:2024
 
مواصفة قياسية دولية
Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method
ISO/IEC 23090-3:2024
 
مواصفة قياسية دولية
Information technology — Coded representation of immersive media — Part 3: Versatile video coding