ISO 28902-1:2012

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٠ يناير ٢٠١٢

Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lidar

ملفات الوثيقة ISO 28902-1:2012

الإنجليزية 30 صفحات
الإصدار الحالي
OMR 72.78

مجال الوثيقة ISO 28902-1:2012

This part of ISO 28902 mainly specifies the requirements in order to perform visual range lidar measurements

for the determination of direction-dependent meteorological optical range (MOR). The term "visual-range lidar"

is used in this part of ISO 28902 to apply to the lidar systems making visual-range measurements, commonly

referred to as "visibility measurements". Due to physical approximations, quantitative determination is limited

to a meteorological optical range of between 30 m and 2 000 m. For this range, this part of ISO 28902

specifies the performance of visual-range lidar systems utilizing the method of range‑integrated visual-range

measurements based on light extinction. The following parameters can be calculated based on the directiondependent

meteorological optical range:

a) horizontal visual range;

b) vertical visual range;

c) slant visual range.

NOTE The measures for visibility are strongly related to the historical definitions of visibility, which are related to human

observers. The lidar technique extends the definitions to various conditions, such as daylight and night-time conditions.

In addition, this measurement principle enables the user to retrieve information on cloud base height, boundary

layer depth, fog banks and aerosol profiles due to the signal attenuation by water vapour and/or aerosols.

Examples of these applications are given in Annex C.

This part of ISO 28902 can be applied in the following areas:

— meteorological stations;

— airports;

— harbours;

— waterways;

— roads and motorways;

— automotive;

— oil platforms.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C