GSO OIML D31:2023

Gulf Standard   Current Edition
· Approved on 03 May 2023 ·

General requirements for software controlled measuring instruments

Metrology and measurement in general
Including measuring instruments in general, preferred numbers, standard measures, general aspects of reference materials, etc.

GSO OIML D31:2023 Files

GSO OIML D31:2023 Scope

This International Document specifies the general requirements applicable to legally relevant software-related functionality and security in measuring instruments and gives guidance for verifying the compliance of an instrument with these requirements. This Document shall be taken into consideration by the OIML Technical Committees and Subcommittees as a basis for establishing specific software requirements and procedures in OIML Recommendations applicable to particular categories of measuring instruments (hereafter termed “relevant Recommendations”). The instructions given in this Document apply only to software-controlled measuring instruments or their components. Note 1: This Document does not cover all the technical requirements specific to software-controlled measuring instruments; these requirements are to be given in the relevant Recommendation, e.g. for weighing instruments, water meters, etc. Note 2: This Document addresses some aspects concerning data security. In addition, national regulations for this area need to be considered.

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R121:2007
GSO OIML R121:2007 
Omani Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions

Recently Published from Metrology Sector

GSO ISO 10360-10:2024
ISO 10360-10:2021 
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019 
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO IEC 62828-4:2024
IEC 62828-4:2020 
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
GSO ISO 11807-1:2024
ISO 11807-1:2021 
Gulf Standard
Integrated optics — Vocabulary — Part 1: Optical waveguide basic terms and symbols