GSO EN 71-8:2023

Gulf Standard   Current Edition
· Approved on 03 May 2023 ·

Safety of toys - Part 8: Activity toys for domestic use

Toys
Including safety of toys

GSO EN 71-8:2023 Files

English 61 Pages
Current Edition Reference Language

GSO EN 71-8:2023 Scope

This European Standard specifies requirements and test methods for activity toys for domestic use often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass of one or more children. This European Standard also specifies requirements for: - separately sold accessories for, and components of activity toys; - separately sold swing elements that are ready for use on or in combination with an activity toy; - construction packages for activity toys including components used to build activity toys according to a scheduled building instruction. The scope of this European Standard excludes: - playground equipment intended for public use dealt with in the EN 1176 series; - bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71 1; - toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool; NOTE 1 For information regarding the classification of pools as toys see European Commission guidance document No. 8 from Bibliographical Entry [1]. - pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927. NOTE 2 There is an enhanced risk of drowning in toy pools where the depth of water is in excess of 400 mm. - trampolines for domestic use dealt with in EN 71 14. - inflatable activity toys (except paddling pools). See also A.1.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ASTM D4778:2024
ASTM D4778:15 
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022 
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021 
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 22407:2024
ISO 22407:2021 
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method