GSO ISO 21940-31:2016
ISO 21940-31:2013
Gulf Standard
Current Edition
·
Approved on
22 December 2016
Mechanical vibration -- Rotor balancing -- Part 31: Susceptibility and sensitivity of machines to unbalance
GSO ISO 21940-31:2016 Files
English
19 Pages
Current Edition
Reference Language
59.03 OMR
GSO ISO 21940-31:2016 Scope
This part of ISO 21940 specifies methods for determining machine vibration sensitivity to unbalance and provides evaluation guidelines as a function of the proximity of relevant resonance rotational speeds to the operating speed. This part of ISO 21940 is only concerned with once-per-revolution vibration caused by unbalance. It also makes recommendations on how to apply the numerical sensitivity values in some particular cases.
It includes a classification system that can be applied to machines which is related to their susceptibility to a change in unbalance. Machines are classified into three types of susceptibility and five ranges of sensitivity. The sensitivity values are intended for use on simple machine systems, preferably with rotors having only one resonance speed over their entire operating speed range. The sensitivity values can also be used for machines that have more resonance speeds in their operating speed range if the resonance speeds are widely separated (e.g. by more than 20 %).
The sensitivity values given are not intended to serve as acceptance specifications for any machine group, but rather to give indications regarding how to avoid gross deficiencies as well as specifying exaggerated or unattainable requirements. They can also serve as a basis for more involved investigations (e.g. when in special cases a more exact determination of the required sensitivity is necessary). If due regard is paid to the values given, satisfactory running conditions can be expected in most cases.
The consideration of the sensitivity values alone does not guarantee that a given magnitude of vibration in operating is not exceeded. Many other sources of vibration can occur which lie outside the scope of this part of ISO 21940.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS


GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS


Recently Published from Mechanical Sector
GSO ECE R 51:2024
ECE R 51:2023
Gulf Standard
Uniform provisions concerning the approval of motor vehicles having at least four wheels with regard to their sound emissions

GSO ISO 13256-1:2024
ISO 13256-1:2021
Gulf Standard
Water-source heat pumps
— Testing and rating for performance
— Part 1: Water-to-air and brine-to-air heat pumps


GSO EN 13077:2024
EN 13077:2023
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B

GSO ASTM E2218:2024
ASTM E2218:23
Gulf Standard
Standard Test Method for Determining Forming Limit Curves

