GSO IEC/TS 60034-24:2015

IEC TS 60034-24:2009
Gulf Standard   Current Edition · Approved on 03 September 2015

Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

GSO IEC/TS 60034-24:2015 Files

English 44 Pages
Current Edition Reference Language

GSO IEC/TS 60034-24:2015 Scope

This part of IEC 60034 is applicable to the on-line detection and diagnosis of failures at the active parts of multi-phase rotating electrical machines (induction and synchronous machines) and of bearing currents. The failure analysis includes: – interturn faults; – phase-to-phase short-circuits; – double earth faults and single earth faults of motors with earth connection of the starpoint; – static and dynamic eccentricities; – cage imperfection or defects (e.g. broken bars or end-rings); – bearing currents. This can be achieved by tools like search coils or other magnetic sensors or partly by the analysis of the terminal voltages and currents. The detection of the following effects is excluded from the scope: – vibration (covered by ISO standards, e.g. ISO 10816 and ISO 7919); – partial discharge (covered by IEC 60034-27); – single earth-faults of motors without earth connection of the star-point; – core imperfection. Also excluded are special methods applicable for specific applications only (e.g. turbo generators).

Best Sellers From Electrical Sector

GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines
GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 1899:2016
 
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems

Recently Published from Electrical Sector

GSO IEC 60704-2-3:2026
IEC 60704-2-3:2025 
Gulf Standard
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
GSO IEC 60270:2026
IEC 60270:2025 
Gulf Standard
High-voltage test techniques – Charge-based measurement of partial discharges
GSO IEC TS 62600-301:2026
IEC TS 62600-301:2019 
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment
GSO IEC TS 62600-10:2026
IEC TS 62600-10:2021 
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs)