GSO ISO 17201-2:2009
Gulf Standard
Current Edition
·
Approved on
11 February 2009
·
Acoustics - Noise from shooting ranges - Part 2 : Estimation of muzzle blast and projectile sound by calculation
GSO ISO 17201-2:2009 Files
English
31 Pages
Current Edition
Reference Language
66.43 OMR
GSO ISO 17201-2:2009 Scope
This part of ISO 17201 specifies methods for estimating the acoustic source data of muzzle blast and
explosions and the source data of projectile sound on the basis of non-acoustic data for firearms with calibres
less than 20 mm and explosions less than 50 g TNT equivalent.
This part of ISO 17201 addresses those cases where no source measurements exist or where the data
necessary to calculate projectile sound according to ISO 17201-4 are unknown. An example of this situation
would be measuring projectile sound from shot guns pellets. This part of ISO 17201 can also be used as an
interpolation method between measurements of muzzle blast.
Source data are given in terms of spectral angular source energy covering the frequency range from 12,5 Hz
to 10 kHz and can be used as data input for sound propagation calculation.
This part of ISO 17201 is not applicable to the prediction of sound levels for the assessment of hearing
damage and cannot be used to predict sound pressure levels or sound exposure levels below a specific
distance where linear acoustics does not apply.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R121:2007
GSO OIML R121:2007
Omani Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 26101-1:2024
ISO 26101-1:2021
Gulf Standard
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
GSO ISO/TR 17534-4:2024
ISO/TR 17534-4:2020
Gulf Standard
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1