OS GSO ASTM C1535:2021
ASTM C1535:05(2017)
Omani Standard
Current Edition
·
Approved on
01 July 2021
Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
OS GSO ASTM C1535:2021 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
OS GSO ASTM C1535:2021 Scope
1.1 This practice covers the minimum requirements and
procedures for field or prefabricated application of Class PI
Exterior Insulation and Finish Systems (EIFS). Class PI EIFS
are systems applied over polyisocyanurate insulation board, in
which the base coat ranges from not less than 1⁄16 in. (1.6 mm)
to 1⁄4 in. (6.4 mm) in dry thickness, depending upon the number
of nonmetallic reinforcing mesh layers encapsulated in the base
coat. The base coat is then covered with a finish coat of various
thickness in a variety of textures and colors. The insulation
board shall be applied over a substrate or over open framing.
1.2 This practice does not cover Class PI EIFS with drainage. Consult the EIFS producer for information.
1.3 The values stated in inch-pound units are to be regarded
as the standard. The SI (metric) values given in parentheses are
approximate and are provided for information purposes only.
1.4 The text of this standard references notes and footnotes
that provide explanatory material. These notes and footnotes
shall not be considered as requirements of the standard.
1.5 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address
all of the safety concerns, if any, associated with its use. It is
the responsibility of the user of this standard to establish
appropriate safety and health practices and determine the
applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
Best Sellers From Construction and Building Sector
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
Recently Published from Construction and Building Sector
OS GSO EN 13888-1:2026
EN 13888-1:2022
Omani Standard
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
OS GSO ASTM E2921:2026
ASTM E2921:25
Omani Standard
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
OS GSO ISO 16000-33:2026
ISO 16000-33:2024
Omani Standard
Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
OS GSO ISO 18393-1:2026
ISO 18393-1:2023
Omani Standard
Thermal insulation products — Determination of settlement — Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling